Yun's Piano Tuning & Repair
  • Main
  • Tuner's Life
  • Bio

Glue the Bridges on Soundboard

5/14/2022

 
Locate the newly capped bridges via triangulation. The triangulation was down when the old bridge was still in the piano. The location data is transferred onto new bridge.
Mark the bridge location, double check with plate in, then use drill bit to locate soundboard button which will be screwed from the bottom of soundboard into bridge body. Some of the holes are for installing weight under bridge if needed. The weights may be added to improve sound quality.
Before gluing on the bridges, the board is sanded smooth. Limited on the press, we glued two smaller bridges, let dry, then glued on the big treble bridge.
Lastly, the soundboard buttons are installed to further fasten the bridge and soundboard together. Next, the board will be finely sanded. The shop owner will spray sanding sealer and finish on it. 

Comments are closed.

    Archives

    January 2025
    December 2024
    November 2024
    October 2024
    September 2024
    August 2024
    July 2024
    June 2024
    May 2024
    March 2024
    February 2024
    January 2024
    December 2023
    November 2023
    October 2023
    September 2023
    August 2023
    July 2023
    June 2023
    May 2023
    April 2023
    March 2023
    February 2023
    January 2023
    December 2022
    November 2022
    October 2022
    September 2022
    August 2022
    July 2022
    June 2022
    May 2022
    April 2022
    March 2022
    February 2022

Proudly powered by Weebly
  • Main
  • Tuner's Life
  • Bio